H3C S5120-SI Series

A-17
ip route-static 17-Static Routing Commands 1-2
ip route-static default-preference 17-Static Routing Commands 1-3
ip ttl-expires enable 12-IP Performance Optimization Commands 1-15
ip unreachables enable 12-IP Performance Optimization Commands 1-16
ip-pool 37-Cluster Management Commands 1-40
J
jumboframe enable 03-Ethernet Port Commands 1-15
K
key (RADIUS scheme view) 21-AAA Commands 2-10
L
lacp port-priority 05-Ethernet Link Aggregation Commands 1-9
lacp system-priority 05-Ethernet Link Aggregation Commands 1-10
last-member-query-interval (IGMP-Snooping
view)
18-Mulitcast Commands 1-25
lcd 15-FTP and TFTP Commands 1-17
ldap-server 22-PKI Commands 1-15
link-aggregation mode 05-Ethernet Link Aggregation Commands 1-10
lldp admin-status 08-LLDP Commands 1-14
lldp check-change-interval 08-LLDP Commands 1-14
lldp compliance admin-status cdp 08-LLDP Commands 1-15
lldp compliance cdp 08-LLDP Commands 1-16
lldp enable 08-LLDP Commands 1-16
lldp encapsulation snap 08-LLDP Commands 1-17
lldp fast-count 08-LLDP Commands 1-18
lldp hold-multiplier 08-LLDP Commands 1-18
lldp management-address-format string 08-LLDP Commands 1-19
lldp management-address-tlv 08-LLDP Commands 1-19
lldp notification remote-change enable 08-LLDP Commands 1-20
lldp timer notification-interval 08-LLDP Commands 1-21
lldp timer reinit-delay 08-LLDP Commands 1-21