To Next Page

To Previous Page

1-3

For a member port in a static aggregation group, only its port number and operational key are displayed,

because it is not aware of the information of the partner.

Examples

# Display the detailed link aggregation information of GigabitEthernet 1/0/1, a member port of a static

aggregation group.

<Sysname> display link-aggregation member-port gigabitEthernet1/0/1

Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,

D -- Synchronization, E -- Collecting, F -- Distributing,

G -- Defaulted, H -- Expired

GigabitEthernet1/0/1:

Aggregation Interface: Bridge-Aggregation1

Port Number: 1

Oper-Key: 1

# Display the detailed link aggregation information of GigabitEthernet 1/0/2, a member port of a

dynamic aggregation group.

<Sysname> display link-aggregation member-port gigabitEthernet1/0/2

Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,

D -- Synchronization, E -- Collecting, F -- Distributing,

G -- Defaulted, H -- Expired

GigabitEthernet1/0/2:

Aggregation Interface: Bridge-Aggregation10

Local:

Port Number: 2

Port Priority: 32768

Oper-Key: 2

Flag: {ACDEF}

Remote:

System ID: 0x8000, 000f-e267-6c6a

Port Number: 26

Port Priority: 32768

Oper-Key: 2

Flag: {ACDEF}

Received LACP Packets: 5 packet(s)

Illegal: 0 packet(s)

Sent LACP Packets: 7 packet(s)

H3C S5120-SI Series Command Reference

Other manuals for H3C S5120-SI Series