H3C S5120-SI Series - Page 905

A-25
server-type 21-AAA Commands 2-22
service-type 21-AAA Commands 1-29
session 23-SSL Commands 1-7
set authentication password 02-Login Commands 1-17
sftp 24-SSH2.0 Commands 1-25
sftp client source 24-SSH2.0 Commands 1-26
sftp server enable 24-SSH2.0 Commands 1-13
sftp server idle-timeout 24-SSH2.0 Commands 1-14
shell 02-Login Commands 1-18
shutdown 03-Ethernet Port Commands 1-25
shutdown
04-Loopback Interface and Null Interface
Commands
1-6
shutdown 05-Ethernet Link Aggregation Commands 1-13
shutdown 09-VLAN Commands 1-7
snmp-agent 30-SNMP Commands 1-11
snmp-agent calculate-password 30-SNMP Commands 1-12
snmp-agent community 30-SNMP Commands 1-13
snmp-agent group 30-SNMP Commands 1-15
snmp-agent local-engineid 30-SNMP Commands 1-16
snmp-agent log 30-SNMP Commands 1-17
snmp-agent mib-view 30-SNMP Commands 1-18
snmp-agent packet max-size 30-SNMP Commands 1-19
snmp-agent sys-info 30-SNMP Commands 1-19
snmp-agent target-host 30-SNMP Commands 1-21
snmp-agent trap enable 30-SNMP Commands 1-22
snmp-agent trap if-mib link extended 30-SNMP Commands 1-23
snmp-agent trap life 30-SNMP Commands 1-24
snmp-agent trap queue-size 30-SNMP Commands 1-25
snmp-agent trap source 30-SNMP Commands 1-25
snmp-agent usm-user { v1 | v2c } 30-SNMP Commands 1-26
snmp-agent usm-user v3 30-SNMP Commands 1-27
snmp-host 37-Cluster Management Commands 1-44