H3C S5120-SI Series Command Reference

1-7
Aggregation Mode: Dynamic
Loadsharing Type: Shar
System ID: 0x8000, 000f-e267-6c6a
Local:
Port Status Priority Oper-Key Flag
-------------------------------------------------------------------------------
GE1/0/2 S 32768 2 {ACDEF}
GE1/0/3 S 32768 2 {ACDEF}
Remote:
Actor Partner Priority Oper-Key SystemID Flag
-------------------------------------------------------------------------------
GE1/0/2 S 32768 2 {ACDEF}
GE1/0/3 S 32768 2 {ACDEF}
Table 1-4 display link-aggregation verbose command output description
Field Description
Loadsharing Type
Loadsharing type:
z Shar for load sharing
z NonS for non-load sharing
Port Status Port state: Selected or unselected.
Flags
One-octet LACP state flags field. From the least to the most
significant bit, they are represented by A through H as follows:
z A indicates whether LACP is enabled. 1 for enabled and 0
for disabled.
z B indicates the timeout control value. 1 for short timeout,
and 0 for long timeout.
z C indicates whether the link is considered as aggregatable
by the sending system. 1 for true, and 0 for false.
z D indicates whether the link is considered as synchronized
by the sending system. 1 for true, and 0 for false.
z E indicates whether the sending system considers that
collection of incoming frames is enabled on the link. 1 for
true and 0 for false.
z F indicates whether the sending system considers that
distribution of outgoing frames is enabled on the link. 1 for
true and 0 for false.
z G indicates whether the receive state machine of the
sending system is using default operational partner
information. 1 for true and 0 for false.
z H indicates whether the receive state machine of the
sending system is in the expired state. 1 for true and 0 for
false.
If a flag bit is set to 1, the corresponding English letter that
otherwise is not output is displayed.
Aggregation Interface Name of the aggregate interface
Aggregation Mode
Mode of the aggregation group: Static for static aggregation,
and Dynamic for dynamic aggregation.
System ID
Local system ID, which comprises the system LACP priority
and the system MAC address.
Local Information about the local end
Port Port type and number

H3C S5120-SI Series Specifications

General

Brand	H3C
Model	S5120-SI Series
Category	Switch
Language	English