Hirschmann RS20 Reference Manual

CLI Commands: Base
120
4.6 Management Commands
CLI L2P
Release 7.0 05/2011
4.6.28 network mgmt-access operation
This command is used to configure the restricted management access
feature (RMA).
It enables or disables the service to have management
access. The default value is disable.
Format
network mgmt-access operation {disable|enable}
Mode
Global Config
enable
Enable the restricted management access function globally.
disable
Disable the restricted management access function globally.
4.6.29 network mgmt-access status
This command is used to configure the restricted management access
feature (RMA).
It activates/deactivates an existing rule with <index>.
Format
network mgmt-access status <index>
{enable | disable}
Mode
Global Config
<index>
Index of the entry in the range 1..16.
enable
Allow the service to have management access.
disable
Do not allow the service to have management access.

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16