282
4.11
System Utilities
CLI L2P
Release
7.0
05/2011
4.11.6 clear config
This command resets the configuration in RAM to the factory defaults without
powering off the switch.
Format
clear config
Mode
Privileged EXEC
4.11.7 clear config factory
This command resets the whole configuration to the factory defaults. Confi-
guration data and scripts stored in nonvolatile memory will also be deleted.
Format
clear config factory
Mode
Privileged EXEC
4.11.8 clear counters
This command clears the stats for a specified <slot/port>or for all the ports or
for the entire switch based upon the argument.
Format
clear counters {<slot/port> | all}
Mode
Privileged EXEC
To Next Page
Loading...
