Hirschmann RS20 Reference Manual

CLI L2P
Release 7.0 05/2011
4.14 PTP - Precision Time Protocol
371
4.14.38ptp v2tc pdelay-interval
Configure the Peer Delay Interval in seconds {1|2|4|8|16|32}. This interval is
used if delay-mechanism is set to p2p.
Format
ptp v2tc pdelay-interval {1|2|4|8|16|32}
Mode
Interface Config
4.14.39ptp v2tc primary-domain
Configure the PTPv2 Transparent Clock (IEEE1588-2008) specific settings.
Configure the primary-domain {for syntonization} of the transparent-clock.
Format
ptp v2tc primary-domain <0-255>
Mode
Global Config
4.14.40ptp v2tc syntonization
Configure the PTPv2 Transparent Clock (IEEE1588-2008) specific settings.
Enable or disable the syntonization of the transparent-clock.
Format
ptp v2tc syntonization {enable|disable}
Mode
Global Config

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16