Hirschmann RS20 Reference Manual

172
4.9 Device Configuration Commands
CLI L2P
Release 7.0 05/2011
4.9.2 adminmode
This command enables the whole Link Aggregation as one single port.
Note: Before adding a port to a Link Aggregation, set the physical mode of
the port. See ‘speed’ command.
Format
adminmode
Mode
Interface Config
U no adminmode
This command disables the whole Link Aggregation as one single port.
Format
no adminmode
Mode
Interface Config

Hirschmann RS20 Specifications

General

Brand	Hirschmann
Model	RS20
Category	Switch
Language	English