Hirschmann RS20

CLI Commands: Switching
CLI L2P
Release 7.0 05/2011
5.4 Fast-HIPER-Ring
449
5.4.2 show fast-hiper-ring current-id (MACH 1000,
RSR20/RSR30)
Specify that you want to show the current Fast HIPER-Ring ID's settings.
Format
show fast-hiper-ring current-id
{id | info | mode | operation | port |
port [primary |secondary] | summary |
ring-name | nodes | vlan}
Mode
Privileged EXEC and User EXEC
id
Display the given Fast HIPER-Ring's ID.
info
Display status information for the given Fast HIPER-Ring ID.
mode
Display the switch's mode for the given Fast HIPER-Ring ID.
operation
Display the switch's operative setting for the given Fast HIPER-Ring
ID.
Note: in case of configuration problems, this value may differ from the
administrative setting (may become 'Disabled').
port
Display the ports for the given Fast HIPER-Ring ID.
port primary
Display the primary port for the given Fast HIPER-Ring ID.
port secondary
Display the secondary port for the given Fast HIPER-Ring ID.
summary
Display a summary for the given Fast HIPER-Ring ID.
ring-name
Display the ring name for the given Fast HIPER-Ring ID.