Hirschmann RS20

CLI L2P
Release 7.0 05/2011
4.16 PoE+ - Power over Ethernet Plus
381
4.16.3 inlinepower threshold slot
Configure the usage power threshold expressed in per cents for comparing
the measured power for this slot and initiating an alarm if the threshold is
exceeded.
Format
inlinepower threshold slot <slot> <0..99>
Mode
Global Config
Slot
For MACH102 devices with M1-8TP-RJ45 PoEP media modules:
Slot = Slot number of the PoE+ module (valid range: 1 - 2)
For MACH104-16TX-PoEP devices: Slot = 1
4.16.4 inlinepower trap slot
Configure the alarm that is send if the configured threshold for this slot is ex-
ceeded.
Format
inlinepower trap slot <slot> {enable | disable}
Mode
Global Config
Slot
For MACH102 devices with M1-8TP-RJ45 PoEP media modules:
Slot = Slot number of the PoE+ module (valid range: 1 - 2)
For MACH104-16TX-PoEP devices: Slot = 1