Hirschmann RS20

CLI L2P
Release 7.0 05/2011
4.14 PTP - Precision Time Protocol
363
4.14.19ptp v2bc vlan
Configure the PTPv2 Boundary Clock (IEEE1588-2008) specific settings.
Use this command to configure the VLAN in which PTP packets are send.
With a value of none all packets are send untagged.
Format
ptp v2bc vlan {none | <0-4042>}
Mode
Interface Config
4.14.20ptp v2bc vlan-priority
Configure the PTPv2 Boundary Clock (IEEE1588-2008) specific settings.
Use this command to configure the VLAN priority.
Format
ptp v2bc vlan-priority <0-7>
Mode
Interface Config
4.14.21ptp v1 burst
Enable or disable the the burst feature for synchronization runs during a
synchronization interval. Default is disable.
Format
ptp v1 burst {enable|disable}
Mode
Interface Config