Hirschmann RS20

CLI Commands: Base
CLI L2P
Release 7.0 05/2011
4.4 Class of Service (CoS) Commands
89
4.4.7 vlan port priority all
This command configures the port priority assigned for untagged packets for
all ports presently plugged into the device. The range for the priority is 0-7.
Any subsequent per port configuration will override this configuration setting.
Format
vlan port priority all <priority>
Mode
Global Config
4.4.8 vlan priority
This command configures the default 802.1p port priority assigned for un-
tagged packets for a specific interface. The range for the priority is 0-7
Default
0
Format
vlan priority <priority>
Mode
Interface Config