Hirschmann RS20

CLI Commands: Base
52
4.1 System Information and Statistics Com-
CLI L2P
Release 7.0 05/2011
4.1.5 show bridge aging-time
This command displays the timeout for address aging.
Format
show bridge aging-time
Mode
Privileged EXEC and User EXEC
4.1.6 show bridge duplex-mismatch-detect
This command displays the Bridge Duplex Mismatch Detection setting
(Enabled or Disabled).
Format
show bridge duplex-mismatch-detect
Mode
Privileged EXEC and User EXEC
4.1.7 show bridge fast-link-detection
This command displays the Bridge Fast Link Detection setting.
Format
show bridge fast-link-detection
Mode
Privileged EXEC and User EXEC