Hirschmann RS20 Reference Manual

CLI Commands: Switching
464
5.6 Port Security
CLI L2P
Release 7.0 05/2011
5.6.7 port-sec allowed-ip remove
Enter the allowed IP source address for this port, format: nnn.nnn.nnn.nnn
(nnn: decimal number 0..255) (up to 50).
Format
port-sec allowed-ip remove <IP Address 1>
<IP Address 2> ... <IP Address 50>
Mode
Interface Config
5.6.8 port-sec allowed-mac
Enter the allowed MAC source address for this port, format:
nn:nn:nn:nn:nn:nn (n: hexadecimal digit) or format: nn:nn:nn:nn:nn:nn/m
(n: hexadecimal digit) (m: decimal digit (1..48)) (up to 10).
Format
port-sec allowed-mac <MAC Address 1>
<MAC Address 2> ... <MAC Address 10>
Mode
Interface Config

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16