Hirschmann RS20 Reference Manual

CLI Commands: Switching
CLI L2P
Release 7.0 05/2011
5.1 Spanning Tree Commands
409
5.1.11 spanning-tree bpduguard
This command sets the BPDU (Bridge Protocol Data Units) Guard on the
switch to enabled.
Default
disabled
Format
spanning-tree bpduguard
Mode
Global Config
U no spanning-tree bpduguard
This command sets the BPDU (Bridge Protocol Data Units) Guard to
disabled.
Format
no spanning-tree bpduguard
Mode
Global Config

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16