CLI L2P
Release
7.0
05/2011
4.9
Device Configuration Commands
221
4.9.61 show mac-filter-table multicast
This command displays the Multicast Forwarding Database (MFDB) informa-
tion. If the command is entered with no parameter, the entire table is dis-
played. This is the same as entering the optional all parameter. The user
can display the table entry for one MAC Address by specifying the MAC ad-
dress as an optional parameter.
Format
show mac-filter-table multicast
[<macaddr> <1-4042>]
Mode
Privileged EXEC and User EXEC
Mac Address
A multicast MAC address for which the switch has forwarding and or
filtering information. The format is two-digit hexadecimal numbers that
are separated by colons, for example 01:23:45:67:89:AB.
Type
This displays the type of the entry. Static entries are those that are
configured by the end user. Dynamic entries are added to the table as
a result of a learning process or protocol.
Component
The component that is responsible for this entry in the Multicast For-
warding Database. Possible values are IGMP Snooping, GMRP and
Static Filtering.
Description
The text description of this multicast table entry.
Interfaces
The list of interfaces that are designated for forwarding (Fwd:) and fil-
tering (Flt:).
Forwarding Interfaces
The resultant forwarding list is derived from combining all the compo-
nent’s forwarding interfaces and removing the interfaces that are
listed as the static filtering interfaces.
To Next Page
Loading...
Need help?
General
