Name: Hirschmann RS20
Brand: Hirschmann
Rating: 5 (1 reviews)

To Next Page

To Previous Page

360

4.14

PTP - Precision Time Protocol

CLI L2P

Release

7.0

05/2011

4.14.13ptp v1 sync-interval

Configure the PTPv1 (IEEE1588-2002) specific settings.

Configure the Precision Time Protocol sync interval. The sync interval is the

interval (in seconds) between successive sync messages issued by a master

clock.

Valid values are: sec-1, sec-2, sec-8, sec-16, and sec-64. Default is sec-2.

Note: changes are only applied after the 're-initialize' command or after a

reboot if the configuration was saved.

Format

ptp v1 sync-interval {sec-1|sec-2|sec-8|sec-16|

sec-64}

Mode

Global Config

sec-1

Set the PTP sync interval to sec-1 (1 sec).

sec-2

Set the PTP sync interval to sec-2 (2 sec).

sec-8

Set the PTP sync interval to sec-8 (8 sec).

sec-16

Set the PTP sync interval to sec-16 (16 sec).

sec-64

Set the PTP sync interval to sec-64 (64 sec).

Other manuals for Hirschmann RS20

Questions and Answers:

Need help?

Do you have a question about the Hirschmann RS20 and is the answer not in the manual?

General