CLI Commands: Base
162
4.7
Syslog Commands
CLI L2P
Release
7.0
05/2011
4.7.5 logging host
This command enables logging to a host where up to eight hosts can be
configured.
Default
Port - 514; Level - Critical;
Format
logging host <hostaddress>
[<port> [<severitylevel>]]
Mode
Global Config
Severity number Severity name Meaning
0 emergency Minimum severity to be logged is 0. This is the
highest level and will result in all other messages of
lower levels not being logged.
1 alert Minimum severity to be logged is 1.
2 critical Minimum severity to be logged is 2.
3 error Minimum severity to be logged is 3.
4 warning Minimum severity to be logged is 4.
5 notice Minimum severity to be logged is 5.
6 info Minimum severity to be logged is 6.
7 debug Minimum severity to be logged is 7. This is the lowest
level and will result in messages of all levels being
logged.
Tab. 15: Possible severity levels
To Next Page
Loading...
Need help?
General
