Hirschmann RS20 Reference Manual

CLI L2P
Release 7.0 05/2011
4.12 LLDP - Link Layer Discovery Protocol
323
discovery, network policy, Power over Ethernet, inventory management and
location information.
Use this command to enable MED. By enabling MED, you will be effectively
enabling the transmit and receive function of LLDP.
Default
Enabled
Format
lldp med
Mode
Interface Config
U no lldp med
Use this command to disable MED.
Format
no lldp med
Mode
Interface Config
4.12.31lldp med all
Use this command to configure LLDP-MED on all the ports.
Default
Enabled
Format
lldp med all
Mode
Global Config

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16