Hirschmann RS20 Reference Manual

CLI Commands: Base
84
4.4 Class of Service (CoS) Commands
CLI L2P
Release 7.0 05/2011
4.4.2 classofservice ip-dscp-mapping
This command maps an IP DSCP value to an internal traffic class.
The <ipdscp> value is specified as either an integer from 0 to 63, or
symbolically through one of the following keywords: af11, af12, af13, af21,
af22, af23, af31, af32, af33, af41, af42, af43, be, cs0, cs1, cs2, cs3, cs4, cs5,
cs6, cs7, ef.
Format
classofservice ip-dscp-mapping
<ipdscp> <trafficclass>
Mode
Global Config
ipdscp
Enter the IP DSCP value in the range of 0 to 63 or an IP DSCP
keyword (af11, af12, af13, af21, af22, af23, af31, af32, af33, af41,
af42, af43, be, cs0, cs1, cs2, cs3, cs4, cs5, cs6, cs7, ef).
trafficclass
Enter the traffic class to map the 802.1p priority (0-3).
U no classofservice ip-dscp-mapping
This command restores the default mapping of the IP DSCP value to an
internal traffic class.
Format
no classofservice dot1p-mapping
Modes
Global Config

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16