CLI Commands: Base
78
4.2
Debug Commands
CLI L2P
Release
7.0
05/2011
4.2.3 debug tcpdump start cpu filter
Run diagnostics commands. With the TCP dump you run a packet
analyzer for capturing network traffic.
This command starts a capture on the CPU interface with the options and
expressions in the filter file.
Format
debug tcpdump start cpu filter <capturefilter>
Mode
Privileged EXEC
4.2.4 debug tcpdump stop
Run diagnostics commands. With the TCP dump you run a packet
analyzer for capturing network traffic.
This command stops a running capture on the CPU interface.
Format
debug tcpdump stop
Mode
Privileged EXEC
To Next Page
Loading...
