Hirschmann RS20 Reference Manual

CLI L2P
Release 7.0 05/2011
4.12 LLDP - Link Layer Discovery Protocol
327
4.12.36lldp med transmit-tlv all
Use this command to specify which optional Type Length Values (TLVs) in
the LLDP MED set will be transmitted in the Link Layer Discovery Protocol
Data Units (LLDPDUs).
Default
By default, the capabilities and network policy
TLVs are included.
Format
lldp med transmit-tlv all [capabilities]
[network-policy]
Mode
Global Config
capabilities
Include/Exclude LLDP capabilities TLV.
network-policy
Include/Exclude LLDP network policy TLV.
U no lldp med med transmit-tlv all
Use this command to remove a TLV.
Format
no lldp med transmit-tlv all [capabilities]
[network-policy]
Mode
Global Config

Hirschmann RS20 Specifications

General

Brand	Hirschmann
Model	RS20
Category	Switch
Language	English