Hirschmann RS20 Reference Manual

CLI Commands: Switching
CLI L2P
Release 7.0 05/2011
5.1 Spanning Tree Commands
411
5.1.13 spanning-tree configuration revision
This command sets the Configuration Identifier Revision Level for use in
identifying the configuration that this switch is currently using. The Configu-
ration Identifier Revision Level is a number in the range of 0 to 65535.
Default
0
Format
spanning-tree configuration revision <0-65535>
Mode
Global Config
U no spanning-tree configuration revision
This command sets the Configuration Identifier Revision Level for use in
identifying the configuration that this switch is currently using to the
default value, i.e. 0.
Format
no spanning-tree configuration revision
Mode
Global Config

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16