Hirschmann RS20

CLI L2P
Release 7.0 05/2011
4.9 Device Configuration Commands
249
4.9.93 vlan
This command creates a new VLAN and assigns it an ID. The ID is a valid
VLAN identification number (ID 1 is reserved for the default VLAN). VLAN
range is 1-4042.
Format
vlan <1-4042>
Mode
VLAN database
U no vlan
This command deletes an existing VLAN. The ID is a valid VLAN identifi-
cation number (ID 1 is reserved for the default VLAN). VLAN range is
1-4042.
Format
no vlan <1-4042>
Mode
VLAN database