CLI Commands: Base
CLI L2P
Release
7.0
05/2011
4.5
Link Aggregation(802.3ad) Commands
93
4.5 Link Aggregation(802.3ad)
Commands
4.5.1 link-aggregation staticcapability
This command enables the support of link-aggregations (static LAGs) on the
device. By default, the static capability for all link-aggregations is disabled.
Default
disabled
Format
link-aggregation staticcapability
Mode
Global Config
U no link-aggregation staticcapability
This command disables the support of static link-aggregations (LAGs) on
the device.
Default
disabled
Format
no link-aggregation staticcapability
Mode
Global Config
To Next Page
Loading...
