Hirschmann RS20

CLI L2P
Release 7.0 05/2011
4.11 System Utilities
285
4.11.13clear link-aggregation
This command clears all link-aggregations (LAGs).
Format
clear link-aggregation
Mode
Privileged EXEC
4.11.14clear signal-contact
This command clears the signal-contact output configuration.
Switches the signal contact 1´s mode to auto and its manual setting to open.
Switches the signal contact 2´s mode to manual and its manual setting to
closed.
Enables the monitoring of the power supplies for signal contact 1 only.
Disables the sending of signal contact traps.
Format
clear signal-contact
Mode
Privileged EXEC