CLI Commands: Base
CLI L2P
Release
7.0
05/2011
4.6
Management Commands
143
4.6.56 snmp-server community ro
This command restricts access to switch information. The access mode is
read-only (also called public).
Format
snmp-server community ro <name>
Mode
Global Config
4.6.57 snmp-server community rw
This command restricts access to switch information. The access mode is
read/write (also called private).
Format
snmp-server community rw <name>
Mode
Global Config
4.6.58 snmp-server location
This command configures the system location.
Format
snmp-server location <system location>
Mode
Global Config
To Next Page
Loading...
