CLI Commands: Base
92
4.4
Class of Service (CoS) Commands
CLI L2P
Release
7.0
05/2011
4.4.11 show dvlan-tunnel
Use this command to display the DVLAN-Tunnel mode and used ether-type
for the specified interface(s).
This command is available for the RS20/RS30/RS40, RSB20, MS20/MS30,
RSR20/RSR30, MACH100, MACH104, MACH1000, MACH1040,
MACH4002-24G/48G (XG), OCTOPUS, OS20/OS30 devices.
Format
show dvlan-tunnel [interface {slot/port} | all]
Modes
Privileged EXEC
User EXEC
<slot/port>
Enter an interface in slot/port format.
all
Enter 'all' for all interfaces.
Interface
Display the number of the interface (slot/port).
Possible values (example): 1/1, 1/2, 2/1, 2/2, 2/3.
Mode
Display the DVLAN-Tunnel mode.
Possible values: normal, ....
EtherType
Display the used ether-type.
Possible values: 802.1Q, vman, custom.
To Next Page
Loading...
