334
4.12
LLDP - Link Layer Discovery Protocol
CLI L2P
Release
7.0
05/2011
4.12.55lldp tlv vlan-name
Configure the port's LLDP TLV inclusion of VLAN Name.
Format
lldp tlv vlan-name <{off|on}>
Mode
Interface Config
4.12.56name
Set or remove a descriptive name for the current interface
(physical ports only).
Format
name <descriptive name>
Mode
Interface Config
<descriptive name>
Enter a descriptive name for the current interface (physical ports
only). Max. length is 20 characters.
Note: If it contains blanks or exclamation marks (!), enclose it in quo-
tation marks ("). The description itself must not contain any quotation
marks (' or "), question marks (?) or backslashes (\).
U no name
Delete the descriptive name for the current interface (physical ports
only).
Format
no name
Mode
Interface Config
To Next Page
Loading...
