Hirschmann RS20 Reference Manual

CLI Commands: Switching
434
5.2 MRP
CLI L2P
Release 7.0 05/2011
5.2.3 mrp current-domain
Specify that you want to configure the current MRP domain's settings.
Default
none
Format
mrp current-domain {advanced-mode {disable|enable}
| manager-priority <0-65535>
| mode {client|manager} | name <domain-name>
| recovery-delay {500ms|200ms}
| operation {disable|enable}
| port {primary|secondary} <slot/port>
| vlan <0-4042>}
Mode
Global Config
advanced-mode
Enable or disable the switch's advanced mode for the given MRP
domain.
manager-priority
Configure the given MRP domain's manager priority (0-65535).
mode
Configure the switch's MRP mode for the given domain (client or
manager).
client: Switch is client for the given MRP domain.
manager: Switch is manager for the given MRP domain.
name
Set a name for the given MRP domain.
recovery-delay
Configure the MRP recovery delay for the given domain.
500ms: Recovery delay is 500 ms for the given MRP domain.
200ms: Recovery delay is 200 ms for the given MRP domain.
operation
Enable or disable the switch for the given MRP domain.

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16