Hirschmann RS20

CLI Commands: Security
CLI L2P
Release 7.0 05/2011
6.1 Security Commands
497
6.1.6 dot1x dynamic-vlan enable
Use this command to enable the switch to create VLANs dynamically when
a RADIUS-assigned VLAN does not exist in the switch.
Default
disabled
Format
dot1x dynamic-vlan enable
Mode
Global Config
U no dot1x dynamic-vlan enable
Use this command to disable the switch to create VLANs dynamically when
a RADIUS-assigned VLAN does not exist in the switch.
Default
disabled
Format
no dot1x dynamic-vlan enable
Mode
Global Config