Hirschmann RS20

288
4.11 System Utilities
CLI L2P
Release 7.0 05/2011
4.11.19copy
This command uploads and downloads to/from the switch. Remote URLs
can be specified using tftp.
copy (without parameters) displays a brief explanation of the most important
copy commands. A list of valid commands is provided below.
The command can be used to the save the running configuration to nvram by
specifying the source as system:running-config and the destination as
nvram:startup-config.
Default
none
Format
copy
copy aca:script <sourcefilename> nvram:script
[targetfilename]
copy aca:capturefilter <sourcefilename>
nvram:capturefilter [targetfilename]
copy aca:sfp-white-list <sourcefilename>
nvram:sfp-white-list
copy nvram:backup-image system:image
copy nvram:clibanner <url>
copy nvram:capture aca:capture
copy nvram:capture <url>
copy nvram:capturefilter <sourcefilename>
aca:capturefilter <targetfilename>
copy nvram:capturefilter <sourcefilename>
copy nvram:errorlog <url>
copy nvram:script <sourcefilename> aca:script
[targetfilename]
copy nvram:script <sourcefilename> <url>
copy nvram:startup-config <url>
copy nvram:startup-config system:running-config
copy nvram:traplog <url>
copy system:running-config nvram:startup-config
<url>
copy system:running-config <url>
copy <tftp://ip/filepath/fileName>
nvram:sfp-white-list
copy <url> nvram:clibanner
copy <url> nvram:capturefilter <destfilename>