Hirschmann RS20 Reference Manual

CLI Commands: Switching
442
5.3 HIPER-Ring
CLI L2P
Release 7.0 05/2011
5.3.1 show hiper-ring
This command displays the settings and states of the HIPER-Ring. The fol-
lowing details are displayed on execution of the command.
Format
show hiper-ring
{info | mode | port [primary | secondary] |
redundancy-state | rm-state | recovery-delay}
Mode
Privileged EXEC and User EXEC
info
Display the information about the HIPER-Ring configuration (cabling).
mode
Display the HIPER-Ring mode settings.
port
Display the HIPER-Ring's primary and secondary port properties.
port primary
Display the HIPER Ring's primary port properties.
port secondary
Display the HIPER Ring's secondary port properties.
redundancy-state
Display the actual state of the HIPER-Ring redundancy.
rm-state
Display the state of the HIPER Ring redundancy manager.
recovery-delay
Display the value of the recovery delay.

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16