Hirschmann RS20 Reference Manual

CLI Commands: Switching
466
5.6 Port Security
CLI L2P
Release 7.0 05/2011
5.6.11 clear port-sec
Clear the MAC/IP Based Port Security by setting each port's security action
(applied when port security is violated) to None. Additionally, the global
mode is set to MAC Based.
Note: This does not clear the 802.1X Port Security.
Format
clear port-sec
Mode
User EXEC and Global Config

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16