Hirschmann RS20 Reference Manual

CLI Commands: Security
496
6.1 Security Commands
CLI L2P
Release 7.0 05/2011
6.1.4 clear radius statistics
This command is used to clear all RADIUS statistics.
Format
clear radius statistics
Mode
Privileged EXEC
6.1.5 dot1x defaultlogin
This command assigns the authentication login list to use for non-configured users for
802.1X port security. This setting is over-ridden by the authentication login list as-
signed to a specific user if the user is configured locally. If this value is not configured,
users will be authenticated using local authentication only.
Format
dot1x defaultlogin <listname>
Mode
Global Config

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16