Hirschmann RS20 Reference Manual

192
4.9 Device Configuration Commands
CLI L2P
Release 7.0 05/2011
4.9.28 rmon-alarm modify rising-event
This command modifies the rising-event of an RMON alarm.
Format
rmon-alarm modify <index> rising-event
<rising-event-index>
Mode
Global Config
index
Enter the index of the RMON alarm.
rising-event-index
Enter the index for the rising event for the RMON
alarm.
4.9.29 rmon-alarm modify falling-event
This command modifies the falling-event of an RMON alarm.
Format
rmon-alarm modify <index> falling-event
<falling-event-index>
Mode
Global Config
index
Enter the index of the RMON alarm.
falling-event-index
Enter the index for the falling event for the RMON
alarm.

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16