CLI Commands: Switching
448
5.4
Fast-HIPER-Ring
CLI L2P
Release
7.0
05/2011
5.4.1 show fast-hiper-ring (MACH 1000, RSR20/
RSR30)
This command displays the settings and states of the HIPER-Ring. The fol-
lowing details are displayed on execution of the command.
Format
show fast-hiper-ring
Mode
Privileged EXEC and User EXEC
Ring ID
Display the Ring ID.
Mode of Switch (administrative setting)
Display the HIPER-Ring mode administrative settings.
Mode of Switch (real operating state)
Display the HIPER-Ring operation mode.
Ring Name
Display theFast-HIPER-Ring's name.
Number of nodes in the ring
Display the number of nodes in the ring.
Port Number, Primary
Display the HIPER-Ring's primary port number and its properties.
Port Number, Secondary
Display the HIPER-Ring's secondary port number and its properties.
Operation
Display the admin state of the HIPER-Ring configuration.
General Operating States
Display general information concerning the fast-hiper-ring state.
To Next Page
Loading...
