Hirschmann RS20 Reference Manual

CLI Commands: Switching
418
5.1 Spanning Tree Commands
CLI L2P
Release 7.0 05/2011
5.1.20 spanning-tree hello-time
This command sets the Hello Time parameter to a new value for the common
and internal spanning tree. The hellotime <value> is in whole seconds within
a range of 1 to 2 with the value being less than or equal to
"(Bridge Max Age / 2) - 1".
Default
2
Format
spanning-tree hello-time <1-2>
Mode
Interface Config
Global Config
U no spanning-tree hello-time
This command sets the Hello Time parameter for the common and
internal spanning tree to the default value, i.e. 2.
Format
no spanning-tree hello-time
Mode
Interface Config
Global Config

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16