CLI Commands: Base
154
4.6
Management Commands
CLI L2P
Release
7.0
05/2011
4.6.69 snmptrap mode
This command activates or deactivates an SNMP trap. Enabled trap receiv-
ers are active (able to receive traps). Disabled trap receivers are inactive (not
able to receive traps).
Format
snmptrap mode <name> <ipaddr>
Mode
Global Config
U no snmptrap mode
This command deactivates an SNMP trap. Disabled trap receivers are
inactive (not able to receive traps).
Format
no snmptrap mode <name> <ipaddr>
Mode
Global Config
To Next Page
Loading...
