Hirschmann RS20 Reference Manual

196
4.9 Device Configuration Commands
CLI L2P
Release 7.0 05/2011
4.9.33 set gmrp adminmode
This command enables GARP Multicast Registration Protocol (GMRP) on
the system. The default value is disable.
Format
set gmrp adminmode
Mode
Privileged EXEC and Global Config
U no set gmrp adminmode
This command disables GARP Multicast Registration Protocol (GMRP)
on the system.
Format
no set gmrp adminmode
Mode
Privileged EXEC and Global Config

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16