256
4.9
Device Configuration Commands
CLI L2P
Release
7.0
05/2011
4.9.100vlan participation all
This command configures the degree of participation for all interfaces in a
VLAN. The ID is a valid VLAN identification number.
Format
vlan participation all <exclude | include | auto>
<1-4042>
Mode
Global Config
Participation options are:
include
The interface is always a member of this VLAN. This is equivalent to
registration fixed.
exclude
The interface is never a member of this VLAN. This is equivalent to
registration forbidden.
auto
The interface is dynamically registered in this VLAN by GVRP. The
interface will not participate in this VLAN unless a join request is
received on this interface. This is equivalent to registration normal.
To Next Page
Loading...
