338
4.13
SNTP - Simple Network Time Protocol
CLI L2P
Release
7.0
05/2011
request-interval
Show the SNTP Client's request interval (unit: seconds).
server
Show the SNTP Client's server IP addresses.
server primary
Show the SNTP Client's primary server IP addresses.
server secondary
Show the SNTP Client's redundant server IP addresses.
server threshold
Show the SNTP Client's threshold in milliseconds.
4.13.4 show sntp operation
This command shows if the SNTP function is enabled or disabled.
Format
show sntp operation
Mode
Privileged EXEC and User EXEC
4.13.5 show sntp server
This command shows the SNTP Server's configuration parameters.
Format
show sntp server [disable-if-local]
To Next Page
Loading...
