Hirschmann RS20

CLI Commands: Switching
CLI L2P
Release 7.0 05/2011
5.9 Sub-Ring Commands
485
5.9.2 sub-ring <id> mode
Configure the switch's Sub-Ring mode for the given ID (manager or
redundant-manager).
Format
sub-ring <id> mode {manager |
redundant-manager |
single-manager}
Mode
Global Config
<id>
Specify the Sub-Ring ID whose settings you want to configure.
manager
Switch is manager for the given Sub-Ring ID.
redundant-manager
Switch is redundant-manager for the given Sub-Ring ID.
single-manager
Switch is single-manager for the given Sub-Ring ID.