CLI Commands: Base
152
4.6
Management Commands
CLI L2P
Release
7.0
05/2011
4.6.67 snmptrap
This command adds an SNMP trap name. The maximum length of name is
32 case-sensitive alphanumeric characters.
Default
The default name for the six undefined community names is Delete.
Format
snmptrap <name> <ipaddr> [snmpversion snmpv1]
Mode
Global Config
U no snmptrap
This command deletes trap receivers for a community.
Format
no snmptrap <name> <ipaddr>
Mode
Global Config
To Next Page
Loading...
