CLI Commands: Switching
CLI L2P
Release
7.0
05/2011
5.1
Spanning Tree Commands
429
5.1.30 spanning-tree stp-mrp-mode
This command sets the spanning tree mrp (Media Redundancy
Protocol) mode to enabled.
Default
disabled
Format
spanning-tree stp-mrp-mode
Mode
Global Config
U no spanning-tree stp-mrp-mode
This command sets the spanning tree mrp (Medium Redundancy
Protocol) mode to disabled.
Format
no spanning-tree stp-mrp-mode
Mode
Global Config
To Next Page
Loading...
