Hirschmann RS20 Reference Manual

CLI Commands: Base
CLI L2P
Release 7.0 05/2011
4.6 Management Commands
97
4.6.3 transport output telnet
This command regulates new outbound telnet connections. If enabled, new
outbound telnet sessions can be established until it reaches the maximum
number of simultaneous outbound telnet sessions allowed.
If disabled, no new outbound telnet session can be established. An
established session remains active until the session is ended or an abnormal
network error ends it.
Default
enabled
Format
transport output telnet
Mode
Line Config
U no transport output telnet
This command disables new outbound telnet connections. If disabled, no
new outbound telnet connection can be established.
Format
no transport output telnet
Mode
Line Config

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16