Hirschmann RS20 Reference Manual

CLI L2P
Release 7.0 05/2011
4.16 PoE+ - Power over Ethernet Plus
379
4.16 PoE+ - Power over Ethernet
Plus
Additionally to the PoE (Power over Ethernet) commands, these commands
show and configure the Power over Ethernet Plus (IEEE 802.3at)
parameters.
PoE+ is available for:
- MACH104-16TX-PoEP devices
- MACH 102 devices with media module M1-8TP-RJ45 PoEP
4.16.1 show inlinepower slot
This command shows the PoE+ configuration settings and states per slot.
Format
show inlinepower slot [<slot> | all]
Mode
Privileged EXEC and User EXEC
Slot
For MACH102 devices with M1-8TP-RJ45 PoEP media modules:
Slot = Slot number of the PoE+ module (valid range: 1 - 2)
For MACH104-16TX-PoEP devices: Slot = 1
Nominal Power
Shows the configured nominal power budget which the device
provides for the PoE+ ports of the PoE+ module.
Maximum Power
Shows the nominal power which the device provides for the PoE+
ports of the PoE+ module (valid range: 0 - 248 W).

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16