CLI L2P
Release
7.0
05/2011
4.9
Device Configuration Commands
205
4.9.43 set igmp static-query-port
This command activates the forwarding of IGMP membership report frames
to this interface even if the given interface has not received any queries. The
purpose is that a port may need to forward such frames even if no queries
have been received on it (e. g., if a router is connected to the interface that
sends no queries).
Default
disabled
Format
set igmp static-query-port
Mode
Interface Config
U no set igmp
This command disables the unconditional forwarding of IGMP member-
ship report frames to this interface.
Format
no set igmp static-query-port
Mode
Interface Config
To Next Page
Loading...
