CLI Commands: Switching
CLI L2P
Release
7.0
05/2011
5.1
Spanning Tree Commands
421
5.1.23 spanning-tree max-hops
This command sets the Bridge Max Hops parameter to a new value for the
common and internal spanning tree. The max-hops value is an integer within
a range of 1 to127.
Format
spanning-tree max-hops <1-127>
Mode
Global Config
U no spanning-tree max-hops
This command sets the Bridge Max Hops parameter for the common and
internal spanning tree to the default value, i.e. 20.
Format
no spanning-tree max-age
Mode
Global Config
To Next Page
Loading...
