Hirschmann RS20

CLI Commands: Security
CLI L2P
Release 7.0 05/2011
6.1 Security Commands
501
6.1.11 dot1x max-req
This command sets the maximum number of times the authenticator state
machine on this port will transmit an EAPOL EAP Request/Identity frame be-
fore timing out the supplicant. The <count> value must be in the range 1 - 10.
Default
2
Format
dot1x max-req <count>
Mode
Interface Config
U no dot1x max-req
This command sets the maximum number of times the authenticator state
machine on this port will transmit an EAPOL EAP Request/Identity frame be-
fore timing out the supplicant.
Format
no dot1x max-req
Mode
Interface Config